Maxon WL7 Spezifikationen PDF herunterladen (Seite 21)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

PLATFORM LOWERED TO GROUND LEVEL

FIG. 21-1

PLATFORM

GROUND

LEVEL

POWER

SWITCH

2. Measure distance from

front of the platform (1) to

the ground (FIG. 21-1).

Next, measure the distance

from the bottom of the vertical

arm (2) to the ground

(FIG. 21-2).

3. The measurement at the verti-

cal arm (2) must be 1/2” -1”

more than the measurement

at the front of platform (1). For

example: If you measure 4” at

the front (1), then you should

measure from 4-1/2” to 5” at the

vertical arm (2). If there is not a

1/2” - 1” difference, go to step 4

to obtain the correct measure-

ment.

(2)

(1)

VERTICAL

ARM

4. Manually lower the Inboard

Rollstop for access to the ad-

justment screws (FIG. 21-2).

To ensure proper leveling, turn

platform tilt adjustment screws

(FIG. 21-2) an equal amount

on both sides of platform. Turn

adjustment screws clockwise

(FIG. 21-3) to tilt the platform

up or counter-clockwise to tilt

platform down.

PLATFORM TILT ADJUSTMENT SCREW

(BACK VIEW OF PLATFORM SHOWN)

FIG. 21-2

PLATFORM TILT ADJUSTMENT SCREWS

FIG. 21-3

CW - PLATFORM

TILT UP

CCW - PLATFORM

TILT DOWN

PLATFORM

ADJUSTMENT

SCREW

INBOARD ROLLSTOP

OUTBOARD

ROLLSTOP

(REF)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 90 91

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxon WL7 Spezifikationen Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Maxon WL7