Maxon WL7 Spezifikationen PDF herunterladen (Seite 17)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

1. Make sure power switch

(FIG. 17-1A) is turned

on. Lower Lift to the

ground (FIG. 17-

1A).

ADJUSTMENTS

MAT SWITCH ADJUSTMENT

LIFT AT GROUND LEVEL

(RH SIDE SHOWN)

FIG. 17-1A

POWER SWITCH

HEIGHT MEASUREMENT

(RH SIDE SHOWN)

FIG. 17-1B

5/8”

NOTE: Do this procedure if structure of the Lift is undamaged and:

• The controller reads “MAT ERR” when the threshold plate is unoccupied

and platform is below ﬂ oor level.

• The threshold warning beacons and threshold warning alarm are on

when threshold is unoccupied and platform is below ﬂ oor level.

• The threshold warning beacons and threshold warning alarm will not turn on

when threshold is occupied and platform is below ﬂ oor level.

• The MAT switch or threshold plate are removed & replaced.

The adjustment is done correctly if:

• The controller does not read “MAT ERR” when the threshold plate is unoc-

cupied and platform is below ﬂ oor level.

• The threshold warning beacons and threshold warning alarm turn on when

threshold is occupied and platform is below ﬂ oor level.

2. Measure the height of the

threshold plate as shown in FIG.

17-1B. If the height is 5/8”,

go to step 4 (skip step 3). If the

height is not 5/8”, go to step 3.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 90 91

Keine Kommentare

Maxon WL7 Spezifikationen Seite 17