Maxon WL7 Spezifikationen PDF herunterladen (Seite 16)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

PLATFORM TILT ADJUSTMENT

1. Make sure power switch (FIG. 16-1) is

turned on and illuminated. Lower platform

to ground level (FIG. 16-1).

NOTE: For the following procedure, ground level

is where the Outboard Rollstop is first fully

opened for crossing.

PLATFORM LOWERED TO GROUND LEVEL

FIG. 16-1

PLATFORM

NOTE: The platform tilt adjustment is important for operation of the Outboard Rollstop and

for keeping Platform level when it reaches the ground. Vehicle floor height, Lift

installation angle, and stiffness of the Vehicle suspension may change the angle of

Platform on the ground.

GROUND

LEVEL

1/2”

MAX.

3. To ensure proper leveling, turn PLATFORM

TILT adjustment screws (FIG. 16-2) an

equal amount, on both sides of Platform.

Turn adjustment screws clockwise (FIG.

16-3) to tilt the Platform up or counter-

clockwise to tilt Platform down.

PLATFORM TILT ADJUSTMENT SCREW

(RH SIDE OF PLATFORM SHOWN)

FIG. 16-2

PLATFORM

ADJUSTMENT

SCREW

INBOARD

ROLLSTOP

(REF)

PLATFORM TILT ADJUSTMENT SCREWS

FIG. 16-3

CCW -

PLATFORM TILT DOWN

CW -

PLATFORM TILT UP

2. Measure the distance between the inboard

edge of Platform and the ground. Distance

should be no more than 1/2” (FIG. 16-1).

ILLUMINATED

POWER SWITCH

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxon WL7 Spezifikationen Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Maxon WL7