Maxon WL7 Spezifikationen PDF herunterladen (Seite 13)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

5. Pull out (no threads) Filler Cap (FIG. 12-2).

Fill the Reservoir with Hydraulic Fluid

(TABLE 13-1) to level (“FL1”) you mea-

sured in step 2. Reinstall Filler Cap (FIG.

12-2)

7. Bolt on the Pump Cover as shown in

FIG. 12-1. Torque the 5/16”-18 cover

screws to approximately 20 LBS.-FT.

3. Disconnect the 2 tubes from barbed

fittings on the Reservoir (FIG. 13-1).

Unbolt the Reservoir from Pump.

Remove the Reservoir and pour the

used hydraulic fluid into a drain pan.

6. Stow the Lift. Check the Hydraulic Fluid level

in Reservoir as follows. Measure length “L”

of Reservoir. With Liftgate stowed, level

“FL” should be as shown in FIG. 13-2 and

TABLE 13-2.

HYDRAULIC FLUID LEVEL

(LH PUMP SHOWN)

FIG. 13-2

4. Bolt the Reservoir on the Pump.

(FIG. 13-1). Reconnect tubes to

barb fittings on the Reservoir.

UNBOLTING / BOLTING RESERVOIR

(LH PUMP SHOWN)

FIG. 13-1

TUBE

BARBED

FITTINGS

RESERVOIR

BOLTS

(4 PLACES)

PUMP

TUBE

TABLE 13-2

FILLER

CAP

RESERVOIR

“L”

“FL”

(SEE TABLE

13-1)

HTGNELRIOVRESER

)"L"(

LEVELDIULF

)"LF"(

"2/1-7"1

"2/1-9"3

TABLE 13-1

DIULFCILUARDYHDEDNEMMOCER

DNARBREBMUNTRAP

DAEMESOR11171DIULFSHT

NOXXE62IVHSIVINU

NOTE: WL7 may be equipped with 1 of 2

different sizes of Reservoir. To

make sure you have correct fluid

level, measure length of Reservoir

before checking fluid level.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxon WL7 Spezifikationen Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Maxon WL7