Maxon WL7 Spezifikationen PDF herunterladen (Seite 11)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

CHECKING HYDRAULIC FLUID LEVEL

CAUTION

Keep dirt, water and other contaminants from entering the hydraulic system.

Before opening the hydraulic fluid reservoir filler cap, drain plug and hydrau-

lic lines, clean up contaminants that can get in the openings. Also, protect

the openings from accidental contamination.

2. If needed, add fluid to the Reservoir as fol-

lows. Pull out (no threads) Filler Cap (FIG.

11-1). Fill the Reservoir with Hydraulic Fluid

(TABLE 11-2) to level “FL” shown in FIG.

11-1. Reinstall Filler Cap (FIG. 11-1).

1. Check the Hydraulic Fluid level in Reservoir as

follows. Measure length “L” of Reservoir. With

Liftgate stowed, level “FL” should be as shown

in FIG. 11-1 and TABLE 11-1.

3. Bolt on the Pump Cover as shown

in FIG. 11-2. Tighten the 5/16”-18

cover screws to approximately

20 LBS.-FT.

BOLTING ON THE PUMP COVER

(LH PUMP SHOWN)

FIG. 11-2

SCREWS

FLAT

WASHERS

(3 PLACES)

PUMP COVER

FILLER

CAP

RESERVOIR

HYDRAULIC FLUID LEVEL

(LH PUMP SHOWN)

FIG. 11-1

HTGNELRIOVRESER

)"L"(

LEVELDIULF

)"LF"(

"2/1-7"1

"2/1-9"3

TABLE 11-2

“L”

“FL”

(SEE TABLE

11-1)

DIULFCILUARDYHDEDNEMMOCER

DNARBREBMUNTRAP

DAEMESOR11171DIULFSHT

NOXXE62IVHSIVINU

TABLE 11-1

NOTE: WL7 may be equipped with 1 of 2

different sizes of Reservoir. To

make sure you have correct fluid

level, measure length of Reservoir

before checking fluid level.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxon WL7 Spezifikationen Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Maxon WL7