Maxon WL7 Spezifikationen PDF herunterladen (Seite 14)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

MAT SWITCH ADJUSTMENT

ADJUSTMENTS

2. Measure the height of the Threshhold

Plate as shown in (FIG. 14-1B). If

the height is not 1/4”, do step 3. If the

height is already 1/4”, skip step 3,

and go on to step 4.

LIFT THRESHHOLD

(REAR VIEW SHOWN)

FIG. 14-2A

HEIGHT ADJUSTMENT SCREW

(RH SIDE SHOWN)

FIG. 14-2B

ADJUSTMENT

SCREW

LIFT AT GROUND LEVEL

FIG. 14-1A

ILLUMINATED

POWER SWITCH

1/4”

HEIGHT MEASUREMENT

(RH SIDE SHOWN)

FIG. 14-1B

1. Make sure power switch (FIG. 14-1A)

is turned on and illuminated. Lower Lift

to the ground (FIG. 14-1A).

HEIGHT ADJUSTMENT SCREWS

FIG. 14-3

CCW - RAISE

CW - LOWER

3. Set edge of the Threshhold Plate to

to 1/4” height by turning the adjust-

ment screw on the RH Side of

Threshhold plate (FIG. 14-2B). Turn

adjustment screw counter-clockwise

(FIG. 14-3) to raise Threshhold

Plate or clockwise to lower. Repeat

for LH Side of Threshhold Plate.

Alternately measure height (see

step 2) and turn the adjustment

screw on RH Side and LH Side

until the entire edge of Threshhold

plate is at the 1/4” height.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxon WL7 Spezifikationen Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Maxon WL7