Maxon WL7 Spezifikationen PDF herunterladen (Seite 21)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

4. Loosen jam nut (FIG. 21-1B)

on the STOW switch adjust-

ment screw. Next turn adjust-

ment screw counter-clockwise

(CCW) (FIG. 21-2) until Con-

troller reads UNFOLD. Turn

adjustment screw clockwise

(CW) (FIG. 21-3) until Con-

troller reads STOWED*. Then

turn the adjustment screw 1/2

turn CW (FIG. 21-4).

6. When adjustment is complete, tighten

jam nut on the adjustment screw

(FIG. 21-1B).

5. Use the Hand Control to stow Lift

(FIG. 18-1). Make sure the Platform

is stowed tightly. Repeat adjustment

steps 1 through 4 if necessary.

STOW SWITCH ADJUSTMENT

FIG. 21-1B

ADJUSTMENT

SCREW

LH TOWER

(LIFT WITH LH PUMP)

FIG. 21-1A

JAM NUT

LIFT TO

REMOVE

3. Remove cover from top of tower

(FIG. 21-1A).

7. Reinstall cover on tower (FIG. 21-1A).

COVER

ADJUST SO CONTROLLER READS “UNFOLD”

FIG. 21-2

CCW

UNFOLD

STOWED*

+ 1/2-TURN CW

ADJUSTMENT SCREW

FIG. 21-4

ADJUST SO CONTROLLER READS “STOWED* ”

FIG. 21-3

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 86 87

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxon WL7 Spezifikationen Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Maxon WL7