Maxon WL7 Spezifikationen PDF herunterladen (Seite 11)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

CHECKING HYDRAULIC FLUID LEVEL

CAUTION

Keep dirt, water and other contaminants from entering the hydraulic sys-

tem. Before opening the hydraulic ﬂ uid reservoir ﬁ ller cap, drain plug and

hydraulic lines, wipe off contaminants that can get in the openings. Also,

protect the openings from accidental contamination.

2. If needed, add ﬂ uid to the Reservoir

as follows. Pull out (no threads) Filler

Cap (FIG. 11-1). Fill the Reservoir

with Hydraulic Fluid (TABLE 11-1) to

level shown in FIG. 11-1. Reinstall

Filler Cap (FIG. 11-1).

1. Check the Hydraulic Fluid level in Reservoir

as follows. With Liftgate stowed, ﬂ uid level

should be as shown in FIG. 11-1.

3. Bolt on the Pump Cover as shown

in FIG. 11-2. Tighten the 5/16”-

18 cover screws until snug.

BOLTING ON THE PUMP COVER

(LH PUMP SHOWN)

FIG. 11-2

SCREWS

FLAT

WASHERS

(3 PLACES)

PUMP COVER

FILLER

CAP

RESERVOIR

HYDRAULIC FLUID LEVEL

(LH PUMP SHOWN)

FIG. 11-1

TABLE 11-1

2”

RECOMMENDED HYDRAULIC FLUID

BRAND PART NUMBER

ROSEMEAD THS FLUID 17111

EXXON UNIVIS HVI 26

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 86 87

Keine Kommentare

Maxon WL7 Spezifikationen Seite 11