Maxon WL7-vers. C Betreibershandbuch PDF herunterladen (Seite 62)

PATENTS PENDING

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

6. Turn the adjustment

screw clockwise on

left side of threshold

plate (FIG. 62-2B),

until threshold warn-

ing alarm and beacon

lights are turned on

(FIG. 62-2A). Next,

turn adjustment screws

counter-clockwise

until threshold warn-

ing alarm and beacon

lights are turned off.

Then, turn adjustment

screw counter-clock-

wise approximately

1/4-turn (FIG. 62-3).

LH SIDE OF LIFT

FIG. 62-2A

ADJUSTING SWITCH

FIG. 62-2B

THRESHOLD

PLATE

THRESHOLD

WARNING BEACON

THRESHOLD SWITCH ADJUSTMENT SCREWS

FIG. 62-3

CW - UNTIL ALARM &

BEACONS TURN ON

1/4-TURN CCW - ALARM &

BEACONS TURN OFF

ADJUSTMENT

SCREW

THRESHOLD

WARNING ALARM

5. Check inside slope angle

across width of threshold

plate (FIG. 62-1). Angle

should be no more than 7.1°.

If necessary, repeat steps to

raise or lower edge of thresh-

old plate to 1/4” and check

for inside slope angle of 7.1°

maximum. When angle is set

at 7.1° maximum, continue

doing procedure.

THRESHOLD PLATE INSIDE SLOPE ANGLE 7.1°

FIG. 62-1

ANGLE

INDICATOR

THRESHOLD (MAT) SWITCH ADJUSTMENT - Continued

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxon WL7-vers. C Betreibershandbuch Seite 62

Kommentare zu diesen Handbüchern